Residential Control Systems TXB16 Manual do Utilizador descarregar pdf (Página 35)

mControl v2 (Home Edition) User Manual

Page 35

Rako Protocol

Embedded Automation is proud to support the Rako protocol as

part of mControl.

For more information on Rako, visit

http://www.rakocontrols.com/

Rako Adapters

mControl supports the following Rako adapters:

¾ RAV232+ Bi-Directional RS232-RF Interface

By default, the RAV232+ adapter driver is disabled. Use the mServer.exe.xml file to adjust

parameters associated with RAV232+ adapter operation:

Parameter Meaning Options

load Whether the adapter is loaded and used Y = loaded

N = not loaded

Default = N

COMPort,

BAUD

Which communication port and baud rate the

adapter is configured to use

Default = COM1

Default = 9600

House Code Which Rako House Code to use

Default = 1

When using serial Rako adapters, please confirm that other drivers are not also using a serial

interface. For example, by default, mControl loads the serial driver of the X10 CM11A adapter. You

may need to unload the X10 CM11A driver if both adapters are using the same serial port to

ensure that there are no duplicate allocations of the serial port.

Rako Devices

Support for most Rako devices, including:

Devices

Multi-level switches – for example, RDL500 (500VA Inductive Dimmer)

Binary switches

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 306 307

Sem comentários

Residential Control Systems TXB16 Manual do Utilizador Página 35