Residential Control Systems TR16 Guia de Instalação descarregar pdf (Página 12)

6 Communication Wiring

After you install the various components of the ENV climate control system, you must set up the

communication wiring so the components can communicate with the PC.

To connect communication wiring:

1. Connect the VLinx converter to the network through a router or hub using a standard network

cable.

2. Connect the VLinx serial server to the RS485 terminals on the I/O module using a 24 AWG to

18AWG twisted pair copper wire (you can also use raw Cat-5 cable) or you can purchase a 9Pin

female cable from Radio Shack and cut off one end to expose the wires and trace them back to

pins 3-5 as follows: Pin 3 is plus and pin 4 is minus and pin 5 is ground.

3. Connect the computer to the network through a router or hub using a standard network cable.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Sem comentários

Residential Control Systems TR16 Guia de Instalação Página 12